| CHECK GROUND CIRCUIT OF VDCCM. |
|
1) Disconnect the connectors from VDCCM. 2) Remove the cover from VDCCM. 3) Connect the connector to the VDCCM. 4) Measure the resistance between VDCCM and chassis ground. Connector & terminal (B310) No. 75 — Chassis ground: |
| QUESTION | |
|
Is the resistance less than 0.5 Ω? | |
| Yes | No |
|
Replace the harness between VDCH/U and VDCCM. |
|