| CHECK RESISTANCE OF THE ABS WHEEL SPEED SENSOR. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the connector from the ABS wheel speed sensor. 3) Measure the resistance of the ABS wheel speed sensor connector terminals by shaking the harness lightly. Connector & terminal Front RH No. 1 — No. 2: Front LH No. 1 — No. 2: Rear RH No. 1 — No. 2: Rear LH No. 1 — No. 2: |
| QUESTION | |
|
Is the resistance within the following? Front: 1 — 1.5 kΩ Rear: 1.025 — 1.265 kΩ | |
| Yes | No |
|
|
Replace the ABS wheel speed sensor. Front: |
