| CHECK HARNESS BETWEEN ECM AND ELECTRONIC THROTTLE CONTROL RELAY. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the connectors from the ECM. 3) Measure the resistance between ECM connector and chassis ground. Connector & terminal (B136) No. 1 — Chassis ground: |
| QUESTION | |
|
Is the resistance 1 MΩ or more? | |
| Yes | No |
|
Repair the poor contact of ECM connector. Replace the ECM if defective. |
Repair the ground short circuit of harness between ECM and electronic throttle control relay. |
