| CHECK LINE PRESSURE LINEAR SOLENOID (IN TRANSMISSION). |
|
1) Remove the transmission connector from bracket. 2) Drain the automatic transmission fluid. CAUTION: Do not drain ATF until it cools down. 3) Remove the oil pan, and disconnect the connector from line pressure linear solenoid. 4) Measure the resistance between line pressure linear solenoid connector and transmission ground. Connector & terminal (AT11) No. 2 — No. 4: |
| QUESTION | |
|
Is the resistance between 4 — 6 Ω? | |
| Yes | No |
|
|
Replace the control valve body. |
