| CHECK HIGH CLUTCH DUTY SOLENOID (IN TRANSMISSION). |
|
1) Remove the transmission connector from bracket. 2) Drain the automatic transmission fluid. CAUTION: Do not drain ATF until it cools down. 3) Remove the oil pan, and disconnect the connector from high clutch duty solenoid. 4) Measure the resistance between high clutch duty solenoid connector and transmission ground. Connector & terminal (AT12) No. 3 — Transmission ground: |
| QUESTION | |
|
Is the resistance between 2.0 — 4.5 Ω? | |
| Yes | No |
|
|
Replace the control valve body. |
