| CHECK LOW & REVERSE BRAKE DUTY SOLENOID (IN TRANSMISSION). |
|
1) Remove the transmission connector from bracket. 2) Drain the automatic transmission fluid. CAUTION: Do not drain ATF until it cools down. 3) Remove the oil pan, and disconnect the connector from low & reverse brake duty solenoid. 4) Measure the resistance between low & reverse brake duty solenoid connector and transmission ground. Connector & terminal (AT12) No. 1 — Transmission ground: |
| QUESTION | |
|
Is the resistance between 2.0 — 4.5 Ω? | |
| Yes | No |
|
|
Replace the low & reverse brake duty solenoid. |
