| CHECK SECONDARY AIR PUMP OPERATION. |
|
1) Connect the test mode connector. 2) Turn the ignition switch to ON. 3) Perform the Clear Memory Mode. 4) Perform operation check for the secondary air pump using the Subaru Select Monitor. NOTE: • Refer to “Compulsory Valve Operation Check Mode” for more operation procedure. • The compulsory operation using the Subaru Select Monitor is performed only for 10 seconds in order to protect the secondary air pump. When operating again, perform the Clear Memory Mode. |
| QUESTION | |
|
Does the secondary air pump operate? | |
| Yes | No |
|
|
|