| CHECK HARNESS BETWEEN ECM AND ACCELERATOR PEDAL POSITION SENSOR. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the connectors from the ECM and accelerator pedal position sensor. 3) Measure the resistance between ECM connector and accelerator pedal position sensor connector. Connector & terminal (B137) No. 25 — (B315) No. 1: (B137) No. 31 — (B315) No. 2: (B136) No. 29 — (B315) No. 3: (B136) No. 17 — (B315) No. 4: (B136) No. 18 — (B315) No. 5: (B136) No. 28 — (B315) No. 6: |
| QUESTION | |
|
Is the resistance less than 1 Ω? | |
| Yes | No |
|
|
Repair the open circuit of harness. |
