| CHECK YAW RATE & LATERAL G SENSOR. |
|
1) Move the vehicle to a level surface. 2) Turn the ignition switch to OFF. 3) Connect the connector to the yaw rate & lateral G sensor. 4) Turn the ignition switch to ON. 5) Measure the voltage between connector terminals of the yaw rate & lateral G sensor when the yaw rate & lateral G sensor is horizontally positioned. Connector & terminal (B257) No. 5 (+) — No. 6 (−) |
| QUESTION | |
|
Is the voltage 2.3 — 2.7 V? | |
| Yes | No |
|
|
Replace the yaw rate & lateral G sensor. |
