CHECK YAW RATE & LATERAL G SENSOR.

1) Turn the ignition switch to OFF.

2) Connect the Subaru data link connector to the data link connector.

3) Turn the ignition switch to ON.

4) Set the Subaru Select Monitor to {Current Data Display & Save} mode.

5) Set the screen to the {Current Data Display & Save} mode.

6) Read the output voltage of yaw rate & lateral G sensor when the vehicle is in a flat horizontal position.

NOTE:

When the yaw rate & lateral G sensor is moved with its power supply on, DTC of yaw rate & lateral G sensor may be recorded.

QUESTION
Is the reading indicated on monitor display 2.3 to 2.7 V?
Yes	No
	Replace the yaw rate & lateral G sensor.