| CHECK IGNITION POWER SUPPLY CIRCUIT. |
|
1) Turn the ignition switch to ON. (engine OFF) 2) Measure the voltage between the AT shift lock control module and chassis ground. Connector & terminal LHD model (B373) No. 1 (+) — Chassis ground (−): RHD model (B376) No. 1 (+) — Chassis ground (−): |
| QUESTION | |
|
Is the voltage 9 V or more? | |
| Yes | No |
|
|
Repair open circuit of the harness between battery and AT shift lock control unit, and any poor contact in connectors. |
