| CHECK HARNESS BETWEEN INHIBITOR SWITCH AND AT SHIFT LOCK CONTROL MODULE. |
|
1) Turn the ignition switch to OFF. 2) Disconnect AT shift lock control unit and transmission harness connectors. 3) Measure the resistance of the harness between the AT shift lock control unit and chassis ground. Connector & terminal LHD model (B373) No. 2 — Chassis ground: RHD model (B376) No. 2 — Chassis ground: |
| QUESTION | |
|
Is the resistance less than 1 Ω? | |
| Yes | No |
|
Repair short circuit of the harness between the AT shift lock control unit and transmission connector. |
|
