| CHECK HARNESS BETWEEN IMMOBILIZER UNIT AND CHASSIS GROUND. |
|
1) Turn the ignition switch to OFF. 2) Disconnect the connector from the immobilizer unit. 3) Measure the resistance between the immobilizer unit harness connector and chassis ground. Connector & terminal (B141) No. 15 — Chassis ground: (B141) No. 25 — Chassis ground: |
| QUESTION | |
|
Is the resistance less than 1 Ω? | |
| Yes | No |
|
|
Repair the open circuit of harness between the immobilizer unit and chassis ground. |
