CHECK IMMOBILIZER UNIT.

1) Connect all connectors.

2) Lift-up the vehicle and place it on rigid racks.

NOTE:

Raise all wheels off the floor.

3) Pull out the tongue plate from the seat belt buckle.

4) Start the engine and drive the vehicle at 19 km/h (12 MPH) or less.

NOTE:

The speed difference between front and rear wheels may illuminate the ABS warning light, but this does not indicate a malfunction. When the diagnosis is complete, the OBD system ABS memory delete procedure is executed.

Check if the seat belt warning light illuminates.

QUESTION

Does the seat belt warning light illuminate?

Yes No

Replace the immobilizer unit.