KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Power Supply ECM Output Check

1. On «Main Menu» display, select {Each System Check}.

2. On «System Selection Menu» display, select {Keyless access system}.

3. On «Keyless access system» display, select {Power Supply ECM}.

4. Click the [OK] button after the control module name (Power Supply ECM) is displayed.

5. On «Power Supply ECM» display, select {Power Supply ECM output check}.

6. On «Power supply ECM output check» display, select {Drive item}.

7. Select the desired function on the «Drive item», and click the [Next] button.

8. Select [Exit] to exit the drive item mode. The screen will return to the «Drive item» screen.

Data	Power supply CM function check	Remarks
Start SW lamp	Light ON	Perform ON/OFF of the push button ignition switch back-up light. ^*
Start SW lamp	Light OFF
Indicator status (amber)	No output	Perform ON/OFF of the push button ignition switch indicator light. ^*
	Amber
	Green
Steering lock power supply	Output	Output power supply signal from power supply CM to steering lock CM.
Steering lock power supply	Stop

^* When lit by a condition other than for a Power Supply ECM output check, it will not become unlit even when set to OFF or no output.