KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Clear Memory Mode

OPERATION

1. On «Main Menu» display, select {Each System Check}.

2. On «System Selection Menu» display, select {Keyless access system}.

3. On «Keyless access system» display, select {Clearing Memory}.

4. Click the [OK] button after the information of engine type has been displayed.

5. When the “Clear Memory?” is shown on the screen, click the [YES] button.

6. When “Done” and “Turn Ignition Switch OFF.” are shown on the display, turn the ignition switch to OFF.

NOTE:

• Initial diagnosis of electronic throttle control is performed after memory clearance. Wait for 10 seconds or more after turning the ignition switch to ON, and then start the engine.

• For detailed operation procedures, refer to “PC application help for Subaru Select Monitor”.