ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)

DTC DETECTING CONDITION:

Immediately at fault recognition

CAUTION:

After repairing or replacing the defective part, perform the Clear Memory Mode and Inspection Mode .

WIRING DIAGRAM:

STEP	CHECK	YES	NO
1.CHECK HARNESS BETWEEN ECM AND GENERATOR. 1) Turn the ignition switch to OFF. 2) Disconnect the connectors from ECM and generator. 3) Turn the ignition switch to ON. 4) Measure the voltage between generator connector and the engine ground. Connector & terminal (F26) No. 3 (+) — Engine ground (−):	Is the voltage 10 V or more?	Repair the short circuit to power in harness between ECM and generator connector.	Repair the poor contact of the ECM connector.