1. Set the vehicle on a lift.

2. Disconnect the ground cable from battery.

3. Lift up the vehicle.

4. Remove the under cover.

5. Disconnect the connector (A) of the main fan motor.

6. Remove the heat shield cover. (Models without ATF warmer)

7. Remove the ATF hose from the clip of the radiator main fan motor assembly. (Models without ATF warmer)

8. Lower the vehicle.

9. Disconnect the over flow hose.

10. Remove the reservoir tank.

11. Drain approximately 2.0 L of coolant.

12. Disconnect the radiator inlet hoses from the engine.

13. Remove the bolts which hold the radiator main fan shroud to the radiator.

14. Remove the radiator main fan motor assembly.