1. Set the vehicle on a lift.

2. Disconnect the ground cable from battery.

3. Lift up the vehicle.

4. Remove the under cover.

5. Remove the connector (B) of sub fan motor.

6. Remove the heat shield cover. (Models without ATF warmer)

7. Remove the ATF hose from the clip of the radiator sub fan motor assembly. (Models without ATF warmer)

8. Lower the vehicle.

9. Remove the air intake duct (rear).

10. Drain approximately 2.0 L of coolant.

11. Disconnect the radiator inlet hoses from the engine.

12. Remove the bolts which hold the radiator sub fan shroud to the radiator.

13. Remove the radiator sub fan motor assembly from underneath the vehicle.