1. Remove the collector cover.

2. Disconnect the ground cable from battery.

3. Remove the bolts that attach the purge control solenoid valve 1 to the intake manifold. Then disconnect the connector from the purge control solenoid valve 1.

4. Disconnect the evaporation hose from the intake manifold and fuel pipe assembly.

1. Remove the collector cover.

2. Disconnect the ground cable from battery.

3. Remove the solenoid valve bracket assembly from intake manifold.

4. Disconnect the connector from purge control solenoid valve 2.

5. Disconnect the evaporation hose from the intake duct and fuel pipe assembly.

6. Remove the purge control solenoid valve 2 from the solenoid valve bracket assembly.