1. Before installing rear oxygen sensor, apply the anti-seize compound only to the threaded portion of rear oxygen sensor to make the next removal easier.
CAUTION:
Never apply anti-seize compound to the protector of rear oxygen sensor.
Anti-seize compound:
NEVER-SEEZ NSN, JET LUBE SS-30 or equivalent
2. Install the rear oxygen sensor.
Tightening torque:
21 N·m (2.1 kgf-m, 15.5 ft-lb)
3. Connect the connector to the rear oxygen sensor, and hold the rear oxygen sensor harness with clip (A).
• AT model
• MT model
4. Lower the vehicle.
5. Connect the ground cable to battery.
