1. Apply a coat of spray type lubricant to the mating area of cushion rubber.
2. Install the rear exhaust pipe to cushion rubber.
NOTE:
After assembling, degrease the lubricant which was applied to the cushion rubber while removing/installing.
3. Install the rear exhaust pipe to the muffler.
NOTE:
Use a new gasket and self-locking nut.
Tightening torque:
48 N·m (4.9 kgf-m, 35.4 ft-lb)
4. Install the front exhaust pipe to the rear exhaust pipe. (integrated front exhaust pipe)
5. Install the center exhaust pipe to rear exhaust pipe. (separate-type front exhaust pipe)
NOTE:
Use a new gasket.
Tightening torque:
18 N·m (1.8 kgf-m, 13.3 ft-lb)
6. Lower the vehicle.