1. Fasten the cam sprocket and install to the cam shaft using ST.
NOTE:
Do not confuse cam sprockets (LH) and (RH) during installation.
| ST 499207400 | CAM SPROCKET WRENCH |
Tightening torque:
Tighten to 30 N·m (3.1 kgf-m, 22.1 ft-lb) of torque, and then tighten further by 45°.
| ST 499977500 | CAM SPROCKET WRENCH |
Tightening torque:
Tighten to 30 N·m (3.1 kgf-m, 22.1 ft-lb) of torque, and then tighten further by 45°.
2. Install the actuator cover of the intake cam sprocket.
NOTE:
Use new O-rings.
Tightening torque:
3.4 N·m (0.3 kgf-m, 2.5 ft-lb)
3. Install the timing belt. 
4. Install the timing belt cover.
5. Install the crank pulley.
6. Install the V-belts.