1. Degrease the connections of each air duct hose and air intake duct.
2. Install the air intake duct.
Tightening torque:
19 N·m (1.9 kgf-m, 14.0 ft-lb)
3. Tighten the clamp connecting the air duct hose and air intake duct.
NOTE:
Install the clamp 3 — 5 mm (0.1181 — 0.1969 in) away from the end of the hose. Do not let the clamp ride over the bulge.
Tightening torque:
5.5 N·m (0.6 kgf-m, 4.1 ft-lb)
|
(A) |
3 — 5 mm (0.1181 — 0.1969 in) |
(C) |
Air intake duct |
(E) |
Air duct hose |
|
(B) |
Clamp |
(D) |
Bulge |
4. Install the air intake duct (rear). 
5. Install the collector cover.
6. Lift up the vehicle.
7. Install the air duct hose and tighten the clamps.
NOTE:
Install the clamp 3 — 5 mm (0.1181 — 0.1969 in) away from the end of the hose. Do not let the clamp ride over the bulge.
Tightening torque:
5.5 N·m (0.6 kgf-m, 4.1 ft-lb)
|
(A) |
3 — 5 mm (0.1181 — 0.1969 in) |
(C) |
Air intake duct or turbocharger |
(E) |
Air duct hose |
|
(B) |
Clamp |
(D) |
Bulge |
|
(A) |
10° — 20° |
(D) |
Insert to the pipe marking, and assemble so that the pipe and hose markings are aligned in a straight line. | ||
|
(B) |
20° |
(E) |
3 — 5 mm (0.1181 — 0.1969 in) | ||
|
(C) |
Turbocharger |
||||
8. Install the under cover.
9. Lower the vehicle.