CAUTION:
• Be sure to use a new flange nut and self-locking nut.
• Always tighten the stabilizer bushing in the state where the vehicle is at curb weight and the wheels are in full contact with the ground.
• Align the paint mark end of stabilizer to the end of stabilizer bushing when installing.
|
(1) |
Identification paint |
|
(2) |
Bushing |
Install in the reverse order of removal.
Tightening torque:
Stabilizer link
45 N·m (4.6 kgf-m, 33.2 ft-lb)
Stabilizer clamp
40 N·m (4.1 kgf-m, 29.5 ft-lb)