Install in the reverse order of removal.
CAUTION:
• Use a new self-locking nut.
• Ensure the stabilizer bushing and stabilizer have the same identification colors.
• Install the stabilizer bushing (front crossmember side) while aligning it with the paint mark on stabilizer.
• The stabilizer bracket has a set orientation. Install it with the arrow mark facing the upper side of the vehicle.
|
(1) |
Front side |
Tightening torque:
Stabilizer link:
45 N·m (4.6 kgf-m, 33.2 ft-lb)
Stabilizer bracket:
25 N·m (2.5 kgf-m, 18.4 ft-lb)