1. Insert the sleeve yoke into the transmission and attach center bearing to body.
Tightening torque:
52 N·m (5.3 kgf-m, 38.4 ft-lb)
2. Align the alignment marks and connect the flange yoke and rear differential.
Tightening torque:
31 N·m (3.2 kgf-m, 22.9 ft-lb)
|
(A) |
Alignment mark |
3. Install the heat shield cover.
4. Install the center exhaust pipe.
5. Install the rear exhaust pipe and muffler.
6. Lower the vehicle.
7. Connect the ground cable to battery.