1. Secure the brake hose to strut mount.
Tightening torque:
33 N·m (3.4 kgf-m, 24.3 ft-lb)
2. Install the brake hose to the caliper using a new gasket.
Tightening torque (union bolt):
18 N·m (1.8 kgf-m, 13.3 ft-lb)
3. Position the disc in straight position and route the brake hose through the hole in the bracket on the wheel apron side.
CAUTION:
Do not twist the brake hose.
4. Temporarily tighten the flare nut which connects brake pipe and hose.
5. Secure the brake hose to wheel apron bracket with clamp.
6. Tighten the flare nut to the specified torque.
Tightening torque (brake pipe flare nut):
15 N·m (1.5 kgf-m, 11.1 ft-lb)
7. Bleed air from the brake system.
1. Route the brake hose through the hole of bracket, and lightly tighten the flare nut to connect brake pipe.
2. Insert the clamp to secure brake hose.
|
(1) |
Brake pipe |
|
(2) |
Brake hose clamp |
|
(3) |
Brake hose |
3. Install the brake hose to rear brake caliper using a new gasket.
Tightening torque:
Union bolt
18 N·m (1.8 kgf-m, 13.3 ft-lb)
Brake hose bracket
33 N·m (3.4 kgf-m, 24.3 ft-lb)
4. Tighten the flare nut to the specified torque.
Tightening torque (brake pipe flare nut):
15 N·m (1.5 kgf-m, 11.1 ft-lb)
5. Bleed air from the brake system.