1. Move the brake pedal pads in a horizontal direction with a force of approx. 10 N (1 kgf, 2 lbf), and check that the pedal deflection is in the range of specifications.
CAUTION:
If excessive deflection is noted, replace with a new bushing.
Deflection of brake pedal:
Service limit
5.0 mm (0.197 in) or less
|
(1) |
Brake pedal |
2. Check the position of the pedal pad.
Pedal height L:
162 — 172 mm (6.38 — 6.77 in)
Brake pedal free play A:
0.5 — 2 mm (0.020 — 0.079 in) [When pulling the brake pedal upward with a force of less than 10 N (1 kgf, 2 lbf).]
|
(1) |
Stop light switch |
|
(2) |
Mat |
|
(3) |
Toe board |
|
(4) |
Brake booster operating rod |
3. If it is not within the specification, loosen the lock nut of brake booster operating rod, and rotate the rod to adjust the pedal height L within the specification.
4. Tighten the lock nut.
Tightening torque:
22 N·m (2.2 kgf-m, 16.2 ft-lb)