1. Install the bolt and nut which secure the brake pedal bracket.
Tightening torque:
18 N·m (1.8 kgf-m, 13.3 ft-lb)
2. Install clevis pin and snap pin which secure the operating rod to the brake pedal.
NOTE:
• Replace with a new clevis pin.
• Apply a thin coat of KOPR-KOTE (Part No. 003603001) to the clevis pin.
|
(1) |
Clevis pin |
|
(2) |
Snap pin |
|
(3) |
Operating rod |
|
(4) |
Brake pedal |
3. Connect the stop light switch connector.
4. Check that the brake light operate properly.
5. Check the brake pedal after installation. 