1. Secure the drive select cable to the lever with a clip, and temporarily tighten the flange nut.
|
(A) |
Flange nut |
|
(B) |
Clip |
2. Install the drive select lever to the vehicle.
Tightening torque:
18 N·m (1.8 kgf-m, 13.3 ft-lb)
3. Adjust the drive select cable. 
4. Tighten the flange nut.
Tightening torque:
18 N·m (1.8 kgf-m, 13.3 ft-lb)
5. Install in the reverse order of removal.