NOTE:
Disassembly is available only for 5MT model.
1. Remove the lock wires.
|
(A) |
Lock wire |
2. Remove the rod from lever.
|
(A) |
Rod |
|
(B) |
Lever |
|
(C) |
Stay |
3. Separate the rod and inner boot.
4. Remove the snap ring from the stay.
|
(A) |
Snap ring |
5. Separate the gear shift lever and the stay.
6. Remove the boot, bushing and snap ring from gear shift lever.
|
(A) |
O-ring |
|
(B) |
Bushing |
|
(C) |
Snap ring |
7. Remove the spring pin, and then remove the bushing and snap ring.
|
(A) |
Spring pin |
|
(B) |
Bushing |
8. Remove the boss from the joint.
9. Remove the bushing and spacer from the boss.
|
(A) |
Bushing |
|
(B) |
Spacer |
10. Remove the bushing and cushion rubber from the stay.
|
(A) |
Bushing B |
|
(B) |
Stay |
|
(C) |
Cushion rubber |