1. Temporarily tighten the drive plate.
2. Using the ST, lock the crankshaft.
| ST 498497100 | CRANKSHAFT STOPPER |
3. Tighten the drive plate in three stages. (2.5 L turbo model)
(1) Tighten the drive plate mounting bolt.
Tightening torque:
10 N·m (1.0 kgf-m, 7.4 ft-lb)
(2) Additionally tighten the drive plate mounting bolts.
Tightening torque:
40 N·m (4.1 kgf-m, 29.5 ft-lb)
(3) While checking the tightening angle with the ST, further tighten the drive plate mounting bolts.
Tightening angle:
30°±5°
| ST 18854AA000 | ANGLE GAUGE |
4. Tighten the drive plate to the specified torque. (except for 2.5 L turbo model)
NOTE:
Tighten the drive plate mounting bolts gradually. Each bolt should be tightened in a crisscross order.
Tightening torque:
72 N·m (7.3 kgf-m, 53.1 ft-lb)
5. Install the transmission assembly to the vehicle. 