1. Remove the manual transmission assembly from the vehicle. 
2. Remove the transfer case together with the extension case assembly.
3. Remove the transmission case.
4. Remove the drive pinion shaft assembly.
5. Remove the main shaft assembly.
• Single-range model
• Dual-range model
6. Remove the front differential assembly.
NOTE:
• Do not confuse the right and left roller bearing outer races.
• Be careful not to damage the oil seal of retainer.
7. Remove the differential side retainers using ST.
| ST 18630AA010 | WRENCH COMPL RETAINER |
8. Remove the bearing outer race from the transmission case.
| ST 398527700 | PULLER ASSY |