1. BACK-UP LIGHT SWITCH & NEUTRAL POSITION SWITCH
1. Install the back-up light switch and neutral position switch together with the harness.
Tightening torque:
32.3 N·m (3.3 kgf-m, 23.8 ft-lb)
|
(A) |
Neutral position switch |
|
(B) |
Back-up light switch |
2. Connect the connectors of the back-up light switch and neutral position switch.
3. Install the air intake chamber and intake boot. (non-turbo model) 
4. Install the intercooler. (turbo model)
5. Connect the ground cable to the battery.
2. HIGH-LOW SWITCH (DUAL-RANGE MODEL)
1. Install the high-low switch.
Tightening torque:
32.3 N·m (3.3 kgf-m, 23.8 ft-lb)
|
(A) |
Clamp |
|
(B) |
High-low switch |
2. Attach the high-low switch cable to the clamp.
3. Connect the high-low switch connector.
4. Install the air intake chamber and intake boot.
5. Connect the ground cable to the battery.