1. Disconnect the ground cable from battery.
2. Remove the air intake chamber and intake boot. (non-turbo model) 
3. Remove the intercooler. (turbo model)
4. Remove the pitching stopper.
2. CROSSMEMBER AND CUSHION RUBBER
1. Disconnect the ground cable from battery.
2. Lift up the vehicle.
3. Remove the front exhaust pipe. (non-turbo model)
4. Remove the center exhaust pipe. (turbo model)
5. Remove the rear exhaust pipe and muffler.
• Non-turbo model
• Turbo model
6. Remove the heat shield cover.
7. Set the transmission jack under the transmission body.
CAUTION:
Always support the transmission case with a transmission jack.
8. Remove the front crossmember and the rear crossmember.
9. Remove the transmission cushion rubber.