1. Select the appropriate reverse shifter lever from the table below, and adjust until the clearance between the reverse idler gear and transmission case wall is within specification.
Clearance A:
6.0 — 7.5 mm (0.236 — 0.295 in)
|
Reverse shifter lever | ||
|
Part No. |
Mark |
Contents |
|
32820AA070 |
7 |
Far from case wall |
|
32820AA080 |
8 |
Standard |
|
32820AA090 |
9 |
Closer to case wall |
2. Select the appropriate washer from the table below, and adjust until the clearance between the reverse idler gear and transmission case wall is within specification.
Clearance:
0 — 0.5 mm (0 — 0.020 in)
|
Washer | |
|
Part No. |
Thickness mm (in) |
|
803020151 |
0.4 (0.016) |
|
803020152 |
1.1 (0.043) |
|
803020153 |
1.5 (0.059) |
|
803020154 |
1.9 (0.075) |
|
803020155 |
2.3 (0.091) |