1. GASOLINE ENGINE MODEL (EXCEPT FOR DUAL MASS FLYWHEEL TYPE)
1. Remove the transmission assembly. 
2. Remove the clutch cover and clutch disc.
3. Using the ST, remove the flywheel.
| ST 498497100 | CRANKSHAFT STOPPER |
|
(A) |
Flywheel |
2. DIESEL ENGINE MODEL (DUAL MASS FLYWHEEL TYPE)
1. Remove the transmission assembly.
2. Remove the clutch cover and clutch disc.
3. Attach the ST to the left side of the transmission mounting stud bolt, engage the ST with the flywheel ring gear and tighten the nut by hand until the nut seating surface contacts the ST.
CAUTION:
To loosen the flywheel attachment bolt, be sure to attach the ST to the left side of the transmission mounting stud bolt.
| ST 18768AA000 | FLYWHEEL STOPPER |
|
(A) |
Flywheel |
4. Loosen the flywheel attachment bolt, using the general tool (Bit holder socket (TORX® PLUS 55IP)), and remove the flywheel.