|
ILLUSTRATION |
TOOL NUMBER |
DESCRIPTION |
REMARKS |
|
|
899524100 |
PULLER SET |
Used for removing the roller bearing (differential). (1) Puller (2) Cap |
|
|
399780104 |
WEIGHT |
Used for measuring preload on the roller bearing. |
|
|
498077000 |
REMOVER |
• Used for removing the roller bearing of the drive pinion shaft. • Used for removing the transfer driven gear taper roller bearing. |
|
|
498077600 |
CENTER DIFFERENTIAL BEARING REMOVER |
Used for removing the center differential cover ball bearing. |
|
|
498147001 |
DEPTH GAUGE |
Used for measuring the main shaft play. |
|
|
498247001 |
MAGNET BASE |
• Used for measuring backlash between the side gear and pinion, and the hypoid gear. • Used together with DIAL GAUGE (498247100). |
|
|
498247100 |
DIAL GAUGE |
• Used for measuring backlash between the side gear and pinion, and the hypoid gear. • Used together with MAGNET BASE (498247001). |
|
|
18667AA020 (Newly adopted tool) |
HOLDER |
Used for securing the drive pinion shaft assembly and the driven gear assembly when removing the drive pinion shaft assembly lock nut. |
|
|
498937000 |
TRANSMISSION HOLDER |
Used for removing and installing the lock nut of the transmission main shaft. |
|
|
499277100 |
BUSHING 1-2 INSTALLER |
• Used for installing the 1st driven gear thrust plate and the 1st-2nd driven gear bushing. • Used for installing the roller bearing outer race to the differential case. |
|
|
499277200 |
INSTALLER |
Used for press-fitting the 2nd driven gear, roller bearings, 3rd-4th driven gear, 5th driven gear and the 6th driven gear onto the driven shaft. |
|
|
499757002 |
INSTALLER |
Used for installing the roller bearing of transfer driven gear (transfer case side). |
|
|
18630AA010 |
WRENCH COMPL RETAINER |
• Used for removing and installing the differential side retainer. • WRENCH ASSEMBLY (499787000) can also be used. |
|
|
18722AA010 |
REMOVER |
Used for removing the 5th drive gear and 6th drive gear. |
|
|
499877000 |
RACE 4-5 INSTALLER |
• Used for installing the 4th, 5th and 6th needle bearing races and ball bearings onto the transmission main shaft. • Used together with REMOVER (899714110). |
|
|
499917500 |
DRIVE PINION GAUGE ASSY |
Used for adjusting the drive pinion shim. |
|
|
499927100 |
HANDLE |
Used for backlash adjustment of the hypoid gear and preload measurement of the roller bearing. |
|
|
499937100 |
TRANSMISSION STAND |
Used for disassembling and assembling the transmission. |
|
|
499987003 |
SOCKET WRENCH (35) |
Used for removing and installing the main shaft lock nut. |
|
|
499987300 |
SOCKET WRENCH (50) |
Used for removing and installing the driven gear assembly lock nut. |
|
|
899714110 |
REMOVER |
Used for removing and installing the parts of transmission main shaft, drive pinion and rear drive shaft. |
|
|
899864100 |
REMOVER |
Used for removing and installing the parts of transmission main shaft, and the transfer driven gear roller bearing. |
|
|
18680AA020 |
HOLDER |
Used for removing and installing the drive pinion lock nut. |
|
|
899904100 |
REMOVER |
Used for removing and installing the straight pin. |
|
|
398497701 |
ADAPTER |
• Used for installing roller bearing onto the differential case. • Used together with BUSHING 1-2 INSTALLER (499277100). |
|
|
498057300 |
INSTALLER |
Used for installing extension oil seal. |
|
|
498255400 |
PLATE |
Used for measuring backlash. |
|
|
18360AA010 |
ENGINE SUPPORT BRACKET |
Used for removing and installing transmission. (1) ENGINE SUPPORT BRACKET (18360AA010) (2) ENGINE SUPPORT (41099AA020) (3) ENGINE SUPPORT (41099AC020) |
|
|
398527700 |
PULLER ASSY |
• Used for removing the extension case roller bearing. • Used for removing the extension oil seal. • Used for removing the front differential side retainer bearing outer race. • Used for removing the front differential side retainer oil seal. |
|
|
398643600 |
GAUGE |
Used for measuring total end play, extension end play and drive pinion height. |
|
|
398177700 |
INSTALLER |
• Used for fitting the transfer drive shaft. • Used for installing the roller bearing of the transfer driven gear. • Used for installing the 4th needle bearing race of transmission main shaft. |
|
|
28399SA010 |
OIL SEAL PROTECTOR |
Used for protecting the oil seal from damage when inserting the front drive shaft. |
|
|
18675AA000 |
DIFFERENTIAL SIDE OIL SEAL INSTALLER |
Used for installing the differential side retainer oil seal. |
|
|
398791700 |
SPRING PIN REMOVER 2 |
Used for installing and removing the spring pin. |
|
|
18662AA010 (Newly adopted tool) |
SOCKET (27) |
Used for removing and installing the drive pinion lock nut. |
|
|
899754112 |
PRESS |
• Used for removing the driven gear and roller bearing of the driven shaft. • Used to install the main shaft ball bearing. |
|
|
18631AA000 |
HANDLE |
Used for installing transfer case assembly and extension case assembly. |
|
|
18762AA000 |
COMPRESSOR SPECIAL TOOL |
Used for removing the 1st driven gear of drive pinion. |
|
|
18654AA000 |
INSTALLER |
Used for installing the 2nd driven gear bushing of driven shaft. |
|
|
18657AA000 |
INSTALLER |
Used for installing the transfer case oil seal. |
|
TOOL NAME |
REMARKS |
|
Circuit tester |
Used for measuring resistance. |
|
TORX® bit T70 |
Used for installing and removing the differential gear oil drain plug. |
|
Spring pin remover |
Used for removing and installing the spring pin. (3 — 3.3 mm) |
|
Socket driver (TORX®45 size) |
Used for removing and installing interlock plate. |