1. Move the reverse shifter rod toward the reverse side. Check the clearance between the reverse idler gear and reverse coupling sleeve.
If out of specification, select an appropriate reverse shifter fork and adjust.
Clearance (a):
0.50 — 0.85 mm (0.020 — 0.033 in)
|
(a) |
Measured value |
|
(A) |
Reverse idler gear |
|
(B) |
Reverse coupling sleeve |
2. After installing a suitable reverse shifter fork, shift into neutral. Check the clearance between the reverse idler gear and reverse idler gear washer.
If out of specification, select the appropriate reverse idler gear bushing and adjust.
Clearance:
0.1 — 0.3 mm (0.004 — 0.012 in)
3. Check the reverse idler gear and shaft for damage. Replace if it is damaged.