1. Remove the manual transmission assembly from the vehicle. 
2. Remove the clutch release lever.
3. Remove the transfer case together with the extension case assembly.
4. Remove the bearing mounting bolt.
5. Remove the main shaft rear plate.
|
(A) |
Main shaft rear plate |
6. Separate the transmission case into the right and left cases by loosening the coupling bolts and nuts.
7. Remove the drive pinion shaft assembly from the left side of the transmission case.
NOTE:
Use a hammer handle, etc. to remove if too tight.
|
(A) |
Main shaft ASSY for single-range |
|
(B) |
Drive pinion shaft ASSY |
8. Remove the main shaft assembly for single-range.
9. Remove the front differential assembly.
NOTE:
• Do not confuse the right and left roller bearing outer races.
• Be careful not to damage the oil seal of retainer.
