1. Align the cutout portion at serrated section of the column shaft and yoke, then install the universal joint into column shaft.
|
(1) |
Cutout portion |
|
(2) |
Yoke |
|
(3) |
Column shaft |
|
(4) |
Column shaft side |
|
(5) |
Gearbox side |
2. Install the universal joint to the serrations of gearbox assembly by matching alignment marks.
3. Tighten the bolt.
Tightening torque:
24 N·m (2.4 kgf-m, 17.7 ft-lb)
CAUTION:
Excessively large tightening torque of universal joint bolts may lead to heavy steering wheel operation.
Clearance between the universal joint coupling and the turbo cover:
15 mm (0.59 in) or more
4. Align the center position of the roll connector. 
5. Install the steering wheel.