1. Disconnect the ground cable from battery.
2. Lift up the vehicle, and then remove the front crossmember support plate and jack-up plate.
• Large type
|
(1) |
Front crossmember support plate |
• Small type
|
(1) |
Front crossmember support plate |
|
(2) |
Jack-up plate |
3. Remove the one pipe joint at the center of the gearbox, and connect the vinyl hose to the pipe and the joint. Discharge the fluid by turning the steering wheel fully clockwise and counterclockwise. Discharge the fluid similarly from other pipes.
|
(1) |
Pipe A |
|
(2) |
Pipe B |
4. Remove the clamp E from return hose and pressure hose.
|
(1) |
Return hose |
|
(2) |
Pressure hose |
|
(3) |
Clamp E |
5. Disconnect the return hose and pressure hose from gearbox.
|
(1) |
Return hose |
|
(2) |
Pressure hose |
6. Remove the air intake duct.
7. Disconnect the suction hose and pressure hose from oil pump.
• Non-turbo model
|
(1) |
Suction hose |
|
(2) |
Pressure hose |
• Turbo model
|
(1) |
Suction hose |
|
(2) |
Pressure hose |
8. Disconnect the suction hose and return hose from the reservoir tank.
|
(1) |
Reservoir tank |
|
(2) |
Suction hose |
|
(3) |
Return hose |
9. Remove the hose bracket and take out the hose assembly from vehicle.
|
(1) |
Hose ASSY |
|
(2) |
Hose bracket |