CAUTION:
Refer to “CAUTION” of “General Description” before handling the airbag module. 
1. Turn the ignition switch to OFF.
2. Disconnect the ground cable from battery and wait for at least 20 seconds before starting work.
3. Remove the upper inner trim.
4. Remove the rear quarter trim.
5. Remove the roof trim.
6. Disconnect the curtain airbag module connector.
7. Remove the inflator pad.
8. Remove the bolts and them remove the curtain airbag module.
CAUTION:
• Be careful not to damage the curtain airbag module during removal.
• Never open the curtain airbag module before deploying it. Never reuse the deployed curtain airbag module.
