1. Check that the wiper motor operates at low speed when the battery is connected to the connectors terminal as shown in the figure.
• LHD model
• RHD model
2. Check that the wiper motor operates at high speed when the battery is connected to the connectors terminal as shown in the figure.
• LHD model
• RHD model
3. Connect the battery to the terminals of the connector, run the motor at low speed, and then disconnect the terminal to stop the wiper motor in mid motion.
• LHD model
• RHD model
4. Connect the battery and confirm that the motor stops at the automatic stop position after the motor operates at low speed.
• LHD model
• RHD model
