Check to ensure that the outer mirror moves properly when the battery voltage is applied to terminals.
Model without mirror heater
|
Switch position |
Terminal No. |
|
OFF |
— |
|
UP |
4 (+) and 6 (−) |
|
DOWN |
6 (+) and 4 (−) |
|
LEFT |
5 (+) and 6 (−) |
|
RIGHT |
6 (+) and 5 (−) |
|
Folding |
1 (+) and 3 (−) |
|
Unfolding |
3 (+) and 1 (−) |
If defective, replace the outer mirror.
Model with mirror heater
|
Switch position |
Terminal No. |
|
OFF |
— |
|
UP |
6 (+) and 8 (−) |
|
DOWN |
8 (+) and 6 (−) |
|
LEFT |
7 (+) and 8 (−) |
|
RIGHT |
8 (+) and 7 (−) |
|
Folding |
2 (+) and 5 (−) |
|
Unfolding |
5 (+) and 2 (−) |
If defective, replace the outer mirror.
NOTE:
There always exists a current of 1.2 mA at the electric retraction terminal.