1. Disconnect the ground cable from battery.
2. Open the screw cover by using flat tip screwdriver.
3. Remove the power window switch panel.
(1) Open the cover and remove the screw.
(2) Pull up on the end of the switch panel by using a plastic remover.
(3) Disengage the end face tabs by using a plastic remover.
(4) Remove the power window switch panel.
4. Disconnect the harness connector.
5. Remove the screws and remove the power window main switch assembly.
1. Disconnect the ground cable from battery.
2. Open the screw cover by using flat tip screwdriver.
3. Remove the power window switch panel.
(1) Open the cover and remove the screw.
(2) Pull up on the end of the switch panel by using a plastic remover.
(3) Disengage the end face tabs by using a plastic remover.
(4) Remove the power window switch panel.
4. Disconnect the harness connector.
5. Remove the screws and remove the power window sub switch assembly.