CAUTION:
Do not detach the antenna from the front door outer handle.
If it requires replacement, replace the entire front outer handle assembly.
1. Disconnect the ground cable from battery.
2. Remove the rear gate trim. 
3. Remove the rear gate garnish assembly.
4. Loosen four screws to remove the rear gate garnish lower cover.
5. Loosen two screws to remove the rear antenna from the rear gate garnish assembly.
CAUTION:
• Do not remove the antenna except when the antenna replacement is necessary. This will lead to antenna rattling.
• When replacing the antenna, do not reuse the screw grommet. Always replace with a new grommet.
