1. Remove the high-mounted stop light. 
2. Remove the clips, and remove the rear gate upper trim.
3. Using a plastic clip remover, disengage the trim tabs and remove the rear gate pillar trim.
4. Remove the hand grip of rear gate.
CAUTION:
Be careful not to scratch the trim.
(1) Open the cover by using a plastic remover, etc.
(2) Remove the screws and detach the hand grip.
NOTE:
If the screw cover cannot be opened, perform the procedures indicated in the figure.
|
(a) |
Precise screwdriver, etc |
|
(1) |
Insert the precise screwdriver, etc. |
|
(2) |
With the precise screwdriver, etc inserted, push down the tab to disengage and pull it towards yourself. |
5. Remove the clips and rear gate lower trim.
