EXTERIOR/INTERIOR TRIM > Instrument Panel Assembly

ASSEMBLY

CAUTION:

When assembling, be careful with routing of the wiring harness. When assembling it into the vehicle body, pinching the wiring harness may cause open circuits and short circuit.

Install the parts in the reverse order of disassembly until the instrument panel assembly is formed.

NOTE:

Insulator installation procedures

• Adhesive

Use polyurethane adhesive. When assembling the instrument panel assembly, wait until the adhesive has evaporated to prevent filling of the smell in the compartment.

• Double-sided tape

Use commercial double-sided tape. (Use strong double-sided adhesive tape.)

Tightening torque:

Instrument panel lower: 7.5 N·m (0.76 kgf-m, 5.5 ft-lb)

Passenger’s airbag module: 7.5 N·m (0.76 kgf-m, 5.5 ft-lb)